top of page

Attention SSG-10 owners - the stock trigger must be replaced with a standard VSR-10 trigger!


A set of components that allows you to convert a spring rifle into a gas rifle. This is a cheap and very effective way to upgrade your equipment.

The entire structure was developed from scratch - as evidenced by the issued patent. All are based on a simple and efficient gas supply system, which is reliable and durable.

With the right design and materials, the mechanism does not burden other components of the rifle - they can be standard (for example, USM, cylinder, etc.). The rifle can be reloaded with one finger - the movement is very smooth.

With the help of a suitable pressure regulator, you can get a very stable (+/-3 fps), satisfactory speed.

Using the Mancraft adjuster provides a continuous zero-to-maximum adjustment speed for your drive (depending on the length of the inner barrel and its diameter).

Some rifles may require parts to be modified for assembly.

As usual: we don't prefer such high results, but the slight scatter and very easy reloading is what we were looking for.

Example values for L96 (WELL MB-08), 590mm Edgi inner barrel length, modified hop chamber: (see photo)

The set includes:

- conversion set

- high pressure hose (about 1.4 m)

The set does not include a regulator!.

WARNING! Does not allow to have a full automatic mode.

Availability: to order


The assortment is constantly expanding. If you did not find your rifle in the list, please email us at and we will try to help you.



SDiK manual in PDF:


Basic SDiK installation guide:

Modifications required for SRS:

Installation instruction SDiK Ares Amoeba Striker S1:

Installation instruction SDiK SRS (pull version):

SDIK - Sniper Drop in Kit

SKU: 0003
  • The set includes:

    - conversion set

    - high pressure hose (about 1.4 m)

bottom of page